Dovetails, Gates, & Ramps
-
Side Mount Dump Ramps
-
4 ft Monster Ramps
-
Rear Slide-in Ramps
-
Expanded Metal Traction Plates
-
1 x 1 Angle Traction Bars
-
Straight Deck w/ 8' Slide-in Ramps
-
5' Dovetail with Three Ramps
-
Power Tail (Patent Pending)
-
4 ft Dovetail w/ Flip Over Ramps
-
Dump Side Gate
-
Dump Landscape Gate
-
Heavy Duty Ramps
-
Heavy Duty Gate
-
Rolling Tailboard
-
Monster Ramps
-
Side Mount ATV Ramps
-
Rear Support Stands (Stabilizers)
-
Ramp Gate Transition Lip
-
Hydraulic Dovetail
-
5' Dovetail w/ 4 Flip-over Ramps
-
Adjustable Dovetail
-
Bi-Fold Gate
-
XL 16" x 77" Rear Slide-in Ramps
-
Fold-in Gate
-
Car Hauler Monster Ramps
-
-
Side Mount Dump Ramps
Features
We offer optional ramps on a our 60" Utility Dump (D5) trailer. These ramps are great for loading ATVs, mowers, and other small vehicles into your dump bed. The ramps are stored on the side of the dump bed over the fenders.
- Available on D5 dump model
- Option Code: R
-
4 ft Monster Ramps
Features
Everybody loves our 5 ft Monster Ramps so we created 4 ft Monster Ramps for our deckover trailer line. Monster Ramps give you an ultra-wide platform to load equipment and store flat to the deck when not in use. The ramps are spring assisted when lifting from the deck and from the ground, making them easy to handle. Monster Ramps are much safer than your typical 16-18" wide gooseneck ramp and give the driver/operator increased confidence when loading in wet weather.
- Available on 8" I-Beam Deckover (F8)
- 41" Wide x 48" Tall
- Double Hinge Ramps Fold Flat for Full Width Deck
- Includes Two Handles Per Ramp For Easy Lifting
- Includes Diamond Plate Ramp Bottoms
- Includes Ramp Support Arms to Pin Ramps to Deck or In Upright Position
- Tail Code: Y
-
-
Rear Slide-in Ramps
Features
Rear slide in ramps are one of the most convenient ramp options for our car and buggy hauler trailers. No longer will you have to remove a ramp from the side of the trailer and carry it to the rear bumper. You simply open the rear ramp doors, slide your ramp out, and place it on the ramp support bar.
-
-
Expanded Metal Traction Plates
Features
We offer expanded metal traction plates on our hydraulic dovetail models. The plates cover the outside deck of the hydraulic dovetail increasing your traction. Available on FY, LY, & PL models, option code: R.
-
-
1 x 1 Angle Traction Bars
Features
These 1" x 1" angle traction bars are welded to the rear of the trailer tail. The bars significantly increase traction in wet and icy conditions. Available on FY, LY, PL, T6, T7, T8, T9, TD, & TF models.
-
-
Straight Deck with 8 ft Slide-in Ramps
Features
Our straight deck with slide-in ramps includes two 8 ft ramps that slide in ramp holders from the rear of the bumper. The load angle with these ramps 20° & 23° for the LD & FD respectively. This is the standard tail option for the FS, FD, & LD models.
-
-
5 ft Dovetail with Three Flip Over Ramps
Features
The 5' dovetail with three flipover ramps has been a popular choice for farmers. Three ramps make stacking round bales of hay possible and also allows you to easily load tricycle tractors. The photos below shows the ramps with the ramp support arm option (option code: z).
-
-
Power Tail (Patent Pending)
Features
The Power Tail (patent pending) is a hydraulic powered trailer tail that replaces typical trailer ramps with a 100% powered ramp system. This allows you to make the trailer ready to load and unload at the touch of a button. The tail rotates a full 180 degrees to serve both as a tail for loading and deck for storing cargo.
The PJ Power Tail is easier, safer, faster, and more reasonably priced than anything else on the market.
Never Lift Another Ramp
Gone are the days of physically flipping multiple ramps then carefully adjusting their position to load your equipment. With the touch of a button you will be able to quickly raise and lower the entire tail, saving your back and your time
Tail Lays Flat to Extend the Deck
In the closed position the tail is completely flat, allowing equipment & cargo to be loaded on top of the diamond plate on the Power Tail. This also reduces wind drag significantly compared to stand-up ramps.
Confidence Inspiring & Safe
The super wide Power Tail gives you the confidence to load and unload equipment without the fear of missing a ramp. The angle cross-members are used on both the dovetail and Power Tail to maximize traction in all-weather situations. Also, the knife edge tail eliminates the initial "bump" when loading that can cause wheel spin.
Shorter and Lighter
Since the tail folds flush to the deck, you don't have to worry about the 4-5 ft of tail overhang that is common on hydraulic dovetails. This fold-over tail and single cylinder design keep the Power Tail short and relatively light to maximize payload capacity. This allows the Power Tail to be installed on short 14k single wheel goosenecks (20 feet) all the way up to triple axle stepdeck trailers as long as 53 feet.
Smart & Highly Efficient Design
The Power Tail (patent pending) uses a single hydraulic cylinder to rotate the tail a full 180 degrees. This ingenious tail design is very mechanically efficient, using just a few moving parts with no wasted movement. This greatly reduces the overall cost and weight of the Power Tail.
Other Benefits
- Self-cleaning angle dovetail & tail allows dirt to easily pass through
- Knife-edge tail eases the loading of small wheeled/low clearance vehicles & equipment
- Heavy duty tail built for loading heavy equipment
- Diamond plate tail cover offers snag-free platform for cargo
- Includes self-contained KTI hydraulic pump system with wired remote (wireless remote available)
- Tail is spring assisted for smooth operation
- Faster than hydraulic dovetail
- Quieter than flip-over ramps (stops ramp bounce)
- Includes ramp support arms for upright storage
- Tail evenly distributes weight when loading, preventing the tail from "burying up" or damaging turf
- Includes an integrated flush-mount 110v battery charger to plug into wall outlet
- Works with all available suspension choices (Air, Torsion, Spring, Hutch)
Power Tail Specs
- Models Available: FS, FD, LS, LD, L3 & LY
- Tail footprint: 72" long x 94" wide tail footprint
- Tail cover material: 11 gauge diamond plate
- Cross-members: 2" x 2" x 3/16" angle
- Ramp Gussets: 10 gauge formed steel
- Total Estimated Weight of Power Tail Option: 1100 lbs (includes tail, box, cylinder, battery, etc)
-
-
4 ft Dovetail with Flip Over Ramps
Features
Our 4ft dovetail with flip over ramps give you all the loading benefits of a dovetail and the ability to load cargo (bales, pallets, etc) on the ramps. The ramps are spring assisted which makes them extremely easy to flip over. The 4 ft tail gives you increased rear bumper clearance over the 5 ft dovetail.
- New 4 ft tail gives increase ground clearance
- Spring Assisted Ramps
- Ramps flip over to lay flat on deck to load secured cargo on
- Self cleaning, high traction dove tail
- Ramp Dimensions: 21" wide x 50" long
- Ramps are double hinged
- 4" x 8" tube rear bumper to protect lights
- Available in both 2 and 3 ramp versions
- Available on 8" I-beam Deckover (F8) only
-
-
Dump Side Gate
Features
A great option for our 83" wide dump trailer is a dump side gate. This option allows you to load and unload material from a side door located in front of the axles. This door makes for easy access when shoveling out dirt/aggregate in the front of the bed. With a 49" wide opening on 16' dumps and 42" wide on 14' dumps it also gives you the ability to side load pallets..
- Gate opening for side-loading pallets, sod, large rocks, mulch bags, etc
- Ramp support bar for side loading small ATVs with rear ramps
- Side gate can be mounted on the driver side or passenger side (not both sides)
- Gate hinges include grease zerks for years of easy operation
- Available on D5 & D8 dump models
-
-
Dump Landscape Gate
Features
We offer a landscape gate on our 83" wide dump trailers (D5, D8, DM, & DL). This gate allows you to load equipment in widths up to 83" and also use the gate to spread small aggregate.
- Fits D5, D8, DM, & DL dump trailers
- Gate measures 86.5" wide x 62" long
- Gate includes handles and is spring assisted to help lifting and lowering
- Gate allows you to load vehicles of varying widths
- Can also be used a spreader gate
- 2" x 2" square tube for ramp section of gate and outside frame
- 1x1 angle cross-members on gate for traction
- Gate requires heavy lifting
- When ordered with dump landscape gate, trailer does not receive ramps
-
-
Heavy Duty Ramps
Features
- HD Ramps are 31" width x 66" long
- 31" wide ramps allows you to load equipment of varying widths and increases safety when loading
- Available with a straight, 2 foot, or 4 foot dovetail on most models
- Includes adjustable ramp legs and ramp support arms
- Ramps are spring assisted for easy lifting and lowering (see photo)
- Ramps feature channel construction covered in expanded metal
- Available on CC, C8, B6, B8, H7, P8, L6, & F8 models
-
-
Heavy Duty Gate
Features
- Heavy duty ramp gate covers entire width of deck
- Makes loading equipment safer by reducing the chance to drive off a ramp
- Available with a straight, 2 foot, or 4 foot dovetail
- Includes adjustable ramp legs, handles, and ramp support arms
- Ramp gate is spring assisted for easy lifting and lowering (see photo below)
- Built from square tube, angle, and channel
- Available in 77", 83", and 94" widths
- Available on C4, C5, CC, B5, B6, B8, H7, P8, L6, F8, U7, and U8 Models
-
-
Rolling Tailboard
Features
Our rolling tailboard is an excellent option for loading and unloading pipe, lumber, pallets, skids, and containers. The roller pipe has a 4 5/8" outside diameter and the brackets are made of 1/2" steel.
-
Monster Ramps
-
Do you have a wide variety of equipment you want to load without sliding ramps? From skid steers to tricycle tractors, our Monster Ramps make loading your equipment with a narrow wheel base simple and safe. These giant ramps are spring loaded to assist in lifting them from the deck and from the ground.
- Available on FS, LS, FD, FY, & LD Models
- Ramps Are Spring Assisted Lifting from Deck and Ground (2 springs lift from deck / 3 springs lift from ground)
- Ramp Size: 44" Wide x 60" Long
- 3/16" steel HD Ramp Gussets Standard
- Double Hinge Ramps Fold Flat for Full Width Deck (Great for Hauling Hay, Pipe, Lumber, etc.)
- Includes Two Handles Per Ramp For Easy Lifting
- Includes Diamond Plate Ramp Bottoms
- Includes Ramp Support Arms to Pin Ramps to Deck or In Upright Position
- Great for Skidsteers, Tricycle Tractors, Small Tractors, Mowers, Mini-Excavators, ATVs, Side by Sides
- Tail Option Code: W
-
-
-
Side Mount ATV Ramps
Features
The side mount ATV ramp option gives you the ability to load an ATV/UTV in the front and one from the rear between the fenders. The frame rails in front of the fenders are ramps that can be removed to offer side loading.
-
Rear Support Stands (Stabilizers)
Features
Want to stabilize the rear of your dump trailer or gooseneck when loading equipment? Our Rear Support Stand option is available on PJ Goosenecks and 83" Wide Dump trailers. Simply pull the hitch pin and you can quickly drop the support stand into place. The foot of the stand has a handle to make them easy to lift and lower.
The 83" wide dump trailers now include a pre-drilled collar standard on the bottom of the rear bumper that makes this option very easy to add on. For the flat deck option a collar has to be added to the rear bumper (included in the price).
Option Code: -RS01 (Dumps) / -RS02 (Flatdecks) Models: 83" wide dumps (D5, DL, D8, & DM) and flatdecks (FS, FD, LD, & F8)
-
-
-
Ramp Gate Transition Lip
Features
Our ramp gate transition lip makes loading vehicles and equipment with small wheels easy work.
-
-
Hydraulic Dovetail
Features
At PJ Trailers we not only created the first gooseneck hydraulic dovetail, we perfected it. Our 10'' dovetail makes it extremely quick to load and unload heavy equipment.
- Deck uses hydraulic power to raise and lower the tail (no lifting ramps)
- Hydraulic pump and battery located in side mount locking toolbox
- 10 ft long tail with 40" diamond plate
- Spring loaded under ride protection bar
- 15 degree load angle for low profile deck (LY model)
- 17 degree for standard deck height (FD & L3 models)
- Available only on FY, LY, & L3 models
- Deck has 10,000 lbs lift capacity and 4,000 lbs hauling capacity from center point forward
- Tail Option Code:
- S -10 ft Hydraulic Dovetail
- C -10 ft Hydraulic Self Cleaning Dovetail (angle only/no wood see photos)
- N -9 ft Double Break Hydraulic Dovetail
-
5 ft. Dovetail with 4 Flip-Over Ramps (Removable)
Features
- Four (4) Ramps cover the width of the dovetail (up to 100" wide)
- Popular for hauling hay, pipe, lumber, containers, and other bulky cargo
- Allows you to use the full length of your deck and still load equipment
- All ramps are double hinge spring assisted for easy lifting
- 5' x 21.5" ramp with 13 degree load angle
- Available on FS, FD, & LD Models (Option Code: Q)
- Can also be ordered with Diamond Plate Ramp Bottoms
-
-
Adjustable Dovetail
Features
-
-
Bi-Fold Gate
Features
- Expanded metal gate folds in center to reduce wind drag and increase fuel economy
- Improves rear visibility
- Available with a straight, 2 foot, or 4 foot dovetail
- Ramp gate is spring assisted for easy lifting and lowering
- Built from square tube, angle, and channel
- Available in 60", 77", and 83" widths
- The bi-fold gate can be retrofitted to most PJ utility trailers
- Available on C4, C5, U6, U7, and U8 Models
-
-
XL 16" x 77" Rear Slide-in Ramps
Features
Want to load lower cars on your PJ car hauler or prefer wider ramps? The XL rear slide-in ramps are the perfect ramps for you.
These ramps are 4" wider and 17" longer than the standard car hauler ramp. Due to the extra length, the load angle is reduced from 18 degrees to just 14 degrees. With rear slide ramps you no longer have to remove a ramp from the side of the trailer and carry it to the rear bumper. You simply open the rear ramp doors, slide your ramp out, and place it on the ramp support bar.
- XL ramps are 4" wider and 17" longer than the standard 12" x 60" ramp.
- Decreases the load angle by 4 degrees
- Easier and safer loading due to extra ramp width and lower load angle
- Tandem axle trailers must be 24 ft or longer, Triple axle trailers must be 34' or longer.
- Does not work on when 80" frame is required (torsion and 8k axles)
- Ramps are made from channel construction
- Available with a straight, 2 foot, or 4 foot dovetail
- Ramps rated 6,500 lbs each
- Available on:
-
-
-
Fold-in Gate
Features
- Expanded metal gate folds flat on to the trailer deck reduce wind drag and increase fuel economy
- Improves rear visibility
- Useful for over length cargo like lumber (check local towing laws)
- Only available on a straight deck (no dovetail)
- Ramp gate is spring assisted for easy lifting and lowering
- Built from square tube with 2" x 3" x 3/16" angle cross-members
- Available in 60", 77", and 83" widths
- The fold-in gate can be retrofitted to most PJ utility trailers
-
-
Features
Our super popular Monster Ramps are a great solution for easy loading and maximizing deck space. We now have these legendary ramps available on our car hauler and super wide models. PJ Monster Ramps give you spring assisted lifting when raising the ramps from the both the deck and from the ground. Despite their size, the spring assist design makes them super easy to flip. Their wide design makes loading in wet weather safer and easier.
-
